Bambu Lab AMS Hub

Bambu Lab

a48f8e8fd473b2275ef04b008e8779ba_66ced993-ab04-455c-a0f8-7439c4fb1cc1_1400x

CHF 68.00*

Content: 1 Stück

Prices incl. VAT plus shipping costs

No longer available. Please contact our service hotline at the bottom of this page if you have any questions.

Product number: BBU-LAB-AMS

Product information "Bambu Lab AMS Hub"

Overview
The AMS Hub is used to expand the number of AMS connected to Bambu X1 series printers from 1 (4 channels) to a maximum of 4 (16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.

In the Box

2x Bus Cable - 6pin, 1xPTFE Tube, 2x M3*28 Screw

Installation

Install the AMS Hub on the back of the printer, replacing the Filament buffer if you have one, and use the matching Bambu 4 Pin cable to connect to the printer, use the Bambu 6 Pin cable to connect to the first AMS, then continue to use the 6-pin cable to connect the remaining AMS in series.
Use the matching PTFE Tube to connect the AMS Hub and the air tube connector on the back of the printer, the tube should pass between the 4-pin plug and the spool holder to reduce the resistance.
According to the placement of the AMS and the printer, you can choose the appropriate length of the PTFE tube to connect the AMS and the AMS Hub. The tube should be as short as possible and avoid winding to reduce the feeding resistance.

Bildungsstufe:	Diploma/High School, Diploma/ Vocational/ Uni, Middle years
Fach:	design, design, informatics, informatics
Fachbereich:	Gestalten, Informatik - ICT, Medien & Informatik - M&I, fächerübergreifend
Hersteller:	Bambu Lab

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Desiccant for AMS（6 pack)

6-pack Dessicant for AMS to keep filaments dry. Compatibility X1 and P1 Series User guide Please take 2 to 3 new desiccant packs, remove the plastic film from the desiccant, install it in the designated location for the AMS. Close the AMS cover to help keep your filament dry. Please ensure that the locking tabs on the AMS are closed to insulate the AMS from external air. How to check if the dessicant needs to be replaced When new, the desiccant will be a white powder. When the dessicant packs absorb moisture, they will gradually turn into a yellow paste. The desiccant needs to be changed when the entire pack is yellow because it loses the ability to keep the filament dry. We also recommend re-drying filament at that point.

Content: 6 Paket(e) (CHF 0.75* / 1 Paket(e))

CHF 4.50*

Details

Bambu Lab AMS - Automatic Material System

The Bambu Lab AMS is an intelligent system that communicates with the tool head to guarantee smooth feeding and automatic mid-print filament switching. Most failures with AMS are due to improper use. Here are some guidelines to reduce issues and have the best user experience. Color, the ultimate expression of emotions, is brought to you by Bambu Lab's Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials. Each AMS unit comes with 4 Reusable Spools (1 high temperature spool and 3 low temperature spools). Product Features Multi-Colors/materials Capability Keep Filament Dry Filament Runout & Winding Detection AMS Filament Backup In the Box 1x High Temperature Reusable Spool(made by PC/ ABS Alloy Material，no filament include) 3x Reusable Spool(made by ABS Material) 1x Filament Buffer 1x Bus Cable - 4pin 1x Bus Cable - 6pin 2x Spare Filament Cutter 3x M3*23 Screw 1x 550mm PTFE Tube 1x 370mm PTFE Tube 4x Internal Tube 1x PTFE Tube Connector 1x Instruction Manual 2x Desiccant（inside the AMS）

CHF 345.00*

Details