BBC micro:bit V2 - Club Box (pack of 10)

CHF 286.00*

Content: 10 Paket(e) (CHF 28.60* / 1 Paket(e))

No longer available. Please contact our service hotline at the bottom of this page if you have any questions.

Product number: KIT-56119

Product information "BBC micro:bit V2 - Club Box (pack of 10)"

The BBC micro:bit is a powerful handheld, fully programmable, computer designed by the BBC and a number of partners to encourage children to get actively involved in writing software and building new things that will be controlled by it. Write your code using one of the easy to use editors provided on the BBC micro:bit website, connect your BBC micro:bit to your computer via USB press the compile button in the editor and then drop the downloaded file directly onto your BBC micro:bit. There is also an app for Android devices.

Wirelessly connect and interact with the world around you. Use Bluetooth Low Energy to connect to mobile phones and tablets, take a selfie or drive the music in your playlists.

The BBC micro:bit is the spiritual successor of the BBC Micro of the 1980s, which itself introduced a generation of children to computing. The BBC micro:bit carries on this 30 year tradition and does it 18 times faster and is 70 times smaller than its predecessor.

Based around a 32 bit ARM Cortex-M0 processor, the BBC micro:bit also features on board accelerometer and compass sensors, Bluetooth Low Energy and USB connectivity, a display consisting of 25 LEDs, two programmable buttons and it can be powered by either USB or an external battery pack. The device inputs and outputs are through five ring connectors that are part of the 21-pin edge connector.

Features:

USB and Bluetooth Low energy connectivity.
Compass and Accelerometer.
2 x user assignable buttons.
A 25 LED display.
21 pin edge connector.

Contents:

10 x BBC micro:bits.
10 x 1M Anti Tangle USB Cables.
10 x Battery Cage.
20 x AAA Batteries.

Dimensions:

PCB Length: 52mm.
PCB Width: 42mm.
PCB Height: 11.7mm.

PCB Height: 11.7mm.

Bildungsstufe:	Middle years, upper primary
DataLogger Schnittstellen:	BBC Micro:Bit
Fach:	Robotics/ Microcontrollers, informatics, informatics
Programmiersprache:	Blockly, Java/Jython, Scratch
Schnittstelle:	BlueTooth, USB
language:	English

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Kitronik Compact All-In-One Robotics Board for BBC micro:bit

With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects. The board is small on footprint but big on features and connectivity. The Robotics Board features 2 Dual H Bridge Motor Driver ICs (capable of driving 2 standard motors or 1 stepper motor each) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from the BBC micro:bit using the I2C protocol via a 16 channel driver IC. Our custom MakeCode blocks make using I2C easy, even for novice users. The Link header breaks out all the usable pins from the BBC micro:bit, and is designed to allow 2.54mm pitch pin header to be easily soldered into place. The 17 available I/O pins allow other input devices, for example, sensors, or output devices, such as ZIP LEDs, to be added to the board. The I2C communication lines are also broken out (Pins 19 & 20), which means other I2C compatible devices can also be added to the board and controlled by the BBC micro:bit. Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board. There is also a green LED to indicate when the board is turned on. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit. This removes the need to power the BBC micro:bit separately. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered. To use the compact robotics board, the BBC micro:bit should be inserted firmly into the edge connector, with the LEDs and buttons visible from the front. Kitronik has produced a set of custom blocks for the MakeCode editor to simplify using the Compact Robotics Board for BBC micro:bit. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu and in the search bar type and enter Kitronik. Pick the Kitronik robotics Board from the list and the new blocks will be added to the menu in the editor. Features: A compact yet feature-packed board designed to sit at the heart of your robotics project. It can drive 4 motors (or 2 stepper motors) and 8 servos. The board also has 17 other I/O expansion points. The link header is designed to allow 2.54mm pitch pin header to be used. The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled. This board also features an on/off switch and power status LED. Power the board via either a terminal block or servo style connector. The 3V and GND pins are also broken out on the Link header, allowing external devices to be powered. Code with the Microsoft MakeCode editor with custom blocks by Kitronik or with Python. Contents: 1 x Compact Robotics Board for BBC micro:bit. Dimensions: Length: 68mm. Width: 46.5mm. Height: 10.6mm. PCB Thickness: 1.6mm

CHF 2,597.00*

Details

BBC micro:bit Board Only

The BBC micro:bit is a pocket-sized codeable computer with motion detection, a built-in compass, LED display, and Bluetooth technology built in. It measures 4cm by 5cm, is available in a range of colours, and designed to be fun and easy to use. It can be coded with something simple in seconds – like lighting up its LEDs or displaying a pattern – with no prior knowledge of computing. It also connects to other devices, sensors, kits and objects, and is a companion to Arduino, Galileo, Kano, littleBits and Raspberry Pi, acting as a spring board to more complex learning. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.co.uk) that can be accessed from a PC, tablet or mobile.

From CHF 8.00*

Details

Inventor's Kit for the BBC micro:bit

Bitte beachten Sie: BBC micro:bit ist NICHT enthalten. Das Kitronik Inventor's Kit für den BBC micro:bit ist der ideale Einstieg in die Programmierung und Hardware-Interaktion mit dem BBC micro:bit. Dieses Inventor's Kit enthält alles, was du für 10 Experimente brauchst, einschließlich der Verwendung von LEDs, Motoren, LDRs und Kondensatoren. Damit du sofort loslegen kannst, haben wir ein leicht verständliches Tutorial-Buch beigelegt, das dich durch alles führt, was du über die Programmierung des BBC micro:bit wissen musst. Sie brauchen keine Erfahrung mit dem Programmieren, da das Buch Sie bei jedem Schritt anleitet. Der BBC micro:bit verfügt über eine Reihe von Pins, die sich an der Unterseite der Platine befinden. Wenn Sie unser speziell entwickeltes Edge Connector Board in Verbindung mit dem Breadboard verwenden, können Sie diese Pins leicht nutzen, um zusätzliche Komponenten an den BBC micro:bit anzuschließen. Features: Führe 10 Experimente durch, die in der mitgelieferten Schritt-für-Schritt-Anleitung enthalten sind. Alle Teile sind enthalten, um die 10 Experimente durchzuführen (unten aufgelistet). Bricht 21 zugängliche Pins des BBC micro:bit mit Hilfe des Edge Connector Boards für den BBC micro:bit (im Lieferumfang enthalten) heraus. Kleines Prototypen-Breadboard für schnelles Prototyping enthalten Inhalt: 1 x Montageplatte. 1 x Potentiometer - Vertikaler Typ (Fingerjustierung) 100K. 1 x Fingereinstellspindel. 2 x Kunststoff-Abstandhalter 10mm. 1 x Klebeband für Batteriepack. 1 x Kleines Prototypen-Brett. 1 x Klemmenanschluss. 4 x Druckschalter. 1 x Motor. 1 x Transistor. 2 x Rote 5mm LED. 2 x Orange 5mm LED. 2 x Gelbe 5 mm LED. 2 x Grüne 5 mm LED. 1 x RGB-LED, 5 mm. 1 x Lüfterflügel. 5 x 2.2KΩ Widerstand. 5 x 10KΩ-Widerstand. 5 x 47Ω Widerstand. 1 x Edge Connector Breakout Board für BBC micro:bit. 10 x Stecker auf Stecker Jumper Drähte. 10 x Überbrückungsdrähte von männlich zu weiblich. 1 x 470uF Elektrolytkondensator. 1 x Piezoelement-Summer. 4 x Pan Head M3 Maschinenschraube.

CHF 285.00*

MI:power board for the BBC micro:bit V1

The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and features a built in buzzer and 3V coin cell holder. When assembled, the MI:power board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built in buzzer is connected to P0, which is the default output pin when using the audio functions in the Block Editor software. The board has an easy to access on/off switch, which makes it easy to turn a project on and off, rather than have to disconnect the power supply from the BBC micro:bit. Once the unit is assembled and attached to the BBC micro:bit the mechanical fixings prevent the battery from being removed unless you use a screwdriver, so whatever the use, the battery will remain safely in place. Spacers, fixings and a battery are all provided. Please Note: BBC micro:bit is NOT included. Features: Power your BBC micro:bit from a stylish PCB. On-Board buzzer. Easy access on/off switch.

CHF 675.00*

micro:bit Smart City Kit

The Smart City Kit has a well-selection of IoT:bit, DHT11 sensor, soil moisture sensor, water level sensor, sonar:bit, servos and etc., we could use it to build such themes as the smart parking lot, transportation network, and river level monitoring…, we can use it to learn more about the IoT and program, and more possibilities of the future city scenes are able to be constructed via it! We provide a very rich microbit projects. Kids can create their own microbit projects from our wiki. WHAT'S INCLUDED? 1 x IoT:bit Internet WIFI extension board for micro:bit 1 x LED-Green 1 x LED-Yellow 1 x LED-Red 1 x DHT11 sensor 1 x Sonar:bit 1 x Soil moisture sensor 1 x Water level sensor 1 x OLED screen 1 x EF92A 180° servo 1 x micro USB cable Jumper wires

CHF 61.29*

Boson Starter Kit for micro:bit

DFRobot’s Boson starter kit for micro:bit includes 8 well selected modules, covering most popular digital and analog sensors and actuators, supporting sound, light and motion interaction. Modules communicates to micro: bit via 3-Pin interface and are perfectly compatible with Microsoft MakeCode JavaScript online Editor and Python Editor. The micro:bit expansion board for Boson is used to hook up Boson modules to micro:bit. The expansion board comes with an edge connector, 6 fool-proof 3-Pin sockets, a 3.5MM headphone jack and a volume knob. Moreover, to ensure a steady current supply for motor and servo, the expansion board can be powered externally through the USB power port. Cultivates kid's programming ability Suitable for age 10+ Supports sound, light and motion interaction Comes with 8 modules, 4 quick start project cards 12-project tutorial from beginning to advance

CHF 85.00*

Kitronik :MOVE Motor for the BBC micro:bit

The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics. More than just a programmable buggy, learning to use all of the included features will give the budding roboteer a solid grounding in robotics as a whole. Requires: 1 x micro:bit, 1 x USB Type-A to Micro-B USB Noodle Cable, 4 x AA batteries.

CHF 45.00*

HUSKYLENS Pro

HuskyLens ist ein einfach zu bedienender AI-Vision Kamera Sensor, der auf ein Eigenbau Roboter angebaut werden kann. Er kann lernen, Objekte, Gesichter, Linien, Farben und Tags durch einfaches Klicken zu erkennen. Die Einstellungen kannst du einfach über die Bedienknöpfe vornehmen. Über UART oder I2C-Port kann HuskyLens eine Verbindung mit deinem Arduino, Raspberry Pi, LattePanda oder BBC micro:bit herstellen. Mit dem HuskyLens kannst du sehr kreative Projekte durchführen, ohne mit komplexen Algorithmen spielen zu müssen. DFRobot hat sich beim HuskyLens zum Ziel gesetzt, der einfachste AI-Vision-Sensor zu entwickeln. Du kannst verschiedene Algorithmen über die Bedienknöpfe ändern. Du kannst dem AI-Sensor auch neue Objekte lernen, die er dann detektieren kann. Info: HuskyLens ist neu auf dem Markt und es sind noch nicht viel Informationen und Programmierbeispiele vorhanden. Deshalb noch nicht für Anfänger geeignet.

CHF 71.68*

Sensor Board for micro:bit

Description The MonkMakes Sensor Board allows you to detect sound levels, temperature and light levels. It features ring pad connectors for use with crocodile clips make it easy to connect to the board to a microbit. Sound Level:It senses sound level with a MEMs, which is a microphone on a chip that also features a pre-amplifier circuit. You can then use the plot bar graph block in the Microsoft MakeCode editor to display the result on the microbits LED matrix. Temperature Level:The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit. If you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32. Light Level:The light sensor uses a photo-transistor to measure the light level and produces an output voltage that increases as the light level increases. It has 3V and GND connectors on both sides of the board which make it possible to power another board, such as the Relay Board or Powered Speaker Board. Features: 3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay Board or MonkMakes Speaker. LED ‘power on’ indicator. Reverse polarity protection. All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips. Detects sound level with a MEMs (microphone on a chip) and a pre-amplifier. Uses a thermistor to measure temperature. Light level detection with a photo-transistor (0 to 1023). All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips. Contents: 1 x MonkMakes Sensor Board for the BBC micro:bit.

CHF 2,182.00*

Kitronik All-in-one Robotics Board for BBC micro:bit V1 & V2

The Grove Temperature and Humidity sensor is a digital relative humidity and temperature sensor with a small footprint that features a grove system connector. It utilises a TH02 sensor that has a good level of accuracy when used in non extreme climates/conditions. It provides accurate humidity readings from 0-80% (±4.5&percnt;) and accurate temperature readings between 0-70°C (±0.5°C). Both the temperature and humidity sensors are factory-calibrated, so no calibration is required. It has an operating voltage of between 3.3V - 5V and has high reliability and stability and requires an I2C Grove compatible interface. Features: It provides accurate humidity readings from 0-80% (±4.5&percnt;) and accurate temperature readings between 0-70°C (±0.5°C). Wide operating voltage range:(3.3V ∼ 5V). Low Power Consumption. Good reliability and stability. It operates as an I2C device. It is factory-calibrated, so no calibration is required.

CHF 2,597.00*

Details

Crocodile Leads (set of 10)

Fünf Paar Krokodilklemmenleitungen (rot, schwarz, grün, gelb und weiss) mit Kunststoff isolierten 35mm Krokodilklemmen an jedem Ende. Länge 500mm. Drahtstärke 14/0,12 mm (22AWG). Maximaler Strom 0,5A.

Content: 10 Paket(e) (CHF 50.90* / 1 Paket(e))

CHF 509.00*

Details

CO2 Sensor for micro:bit

This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit. Note, this item is a special order so lead times are a bit longer than usual. We include a 9V battery clip adapter with the CO2 sensor. (Battery not included).

CHF 150.00*

Kitronik 16 Servo Driver Board for the BBC micro:bit

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit. Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio control receiver packs. The pins from the BBC micro:bit are broken out to pads on the end of the Servo Driver Board, in accordance with the Link Standard for BBC micro:bit accessories. These pads can either be soldered onto directly, or they are the correct spacing for our PCB pin headers (see image below for a close up of the pads). Features: Input voltage 3V - 5.5V. Drive up to 16 servo motors. Servos take power directly from the board power supply. Standard 0.1" pitch servo connectors. Terminal blocks for easy connection of power. Includes Edge Connector for the BBC micro:bit to slot into. Link Standard compatible. Access the other BBC micro:bit pins easily and conveniently. Dimensions: Length: 67.4mm. Width: 62mm. Height: 16mm.

CHF 1,975.00*

Details

Environment Science Expansion Board V2.0 for micro:bit

This micro:bit-based expansion board, specially designed for STEAM education, allows students to measure environmental conditions for scientific experiments by using rich on-board sensors that cover all basic aspects of nature and science in daily life, which helps them explore the related science knowledge and understand nature phenomenon. It aims to provide a platform for students to learn science theory with practices and bring science education closer to daily life! Integrated sensors include UV sensor, temperature sensor, humidity sensor, air pressure sensor, sound sensor, light sensor, water temperature sensor, and a TDS (Total Dissolved Solids) water quality sensor, soil moisture sensor, TVOC, CO2 sensor, etc. FEATURESV2.0 Update Comes with WiFi-IoT card, support IoT platforms such as IFTTT, ThingSpeak, EasyIoT Supports for the measurements of TVOC and CO2 MicroUSB power supply port, battery holder is welded on the PCB, more convenient for classroom teaching Onboard 4-way RGB lights 1-way motor driver More powerful chip and more IO ports Greatly optimized OLED display program, more convenient and flexible to use The color sensor is removed from the list Product Features Highly-Integrated (14 function modules): atmospheric pressure, temperature, humidity, harmful gases(TVOC), carbon dioxide, ultraviolet rays, light, sound, water quality, water temperature, soil humidity, buzzer, RGB light, OLED display, and motor driver. IoT Function: able to be accessible to famous IoT platforms such as IFTTT, ThingSpeak, and EasyIoT through the WIFI-IoT card. The interesting shape of the tree makes the classroom teaching more vivid and fun.

CHF 174.53*

Kitronik MI:pro Protector Case for the BBC micro:bit V1 & V2

This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the new micro:bit V2 and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer. The case is available in 4 different colour options. They are; Clear, Blue, Green, and Orange. The colours don't only look great, they can be used to differentiate between different people's cases. Handy! All of the cases are identical in all other regards. If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for BBC micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit. The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

CHF 5.19*

GamePad for Micro:Bit v3.0

GamePad for microbit V3.0 is a micro: bit gamepad with a joystick. It adopts a high-precision three-axis analog amount joystick. The combination of joystick and gamepad allows you to control Maqueen's direction and speed at the same time. Moreover, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V3.0 product, we have put the external battery box to onboard PCB, which is more convenient to use. Included: micro:bit Wireless Gamepad x1

CHF 30.13*

Kitronik Simple Robotics Kit for the BBC micro:bit

Enter the world of robotics with our Simple Robotics kit and build your own easy build microbit-controlled robot. It has been designed, from the ground up, to be simple to build by even the youngest of fingers. From its one-piece cardboard chassis to its clip lead connections, everything goes together in a way that is as free from frustration as possible. Requires: 1x BBC micro:bit, 1x Screwdriver, 1x Pair of Scissors.

CHF 31.00*

micro:bit Expansion Board for Boson (Gravity Compatible)

The expansion board comes with 6 fool-proof 3-Pin sockets, compatible with hundreds of DFRobot’s Boson and Gravity modularized electronic blocks, covering most popular digital and analog sensors and actuators, supporting sound, light and motion interaction. Moreover, the on-board 3.5MM headphone jack and volume knob supports direct connection of headphone. To ensure a steady current supply for these peripherals, the expansion board can be powered externally through the USB power port.

CHF 135.00*

Kitronik LAB:bit educational platform for BBC micro:bit

The Kitronik LAB:bit for the BBC microbit offers a super fun way for children to learn about coding in an engaging and hands-on way. It has been specifically designed for the classroom for primary school computing and is backed by online MakeCode tutorials, simplified custom blocks, and a detailed getting started guide. Supplied in the box are: a battery holder (3 x AA), a wheel and tyre for the motor, and the detailed easy-to-follow guide. Requires: micro:bit, USB cable for connecting the micro:bit to a computer, 3 x AA batteries, optional: 5V USB Power Supply.

CHF 43.63*

Details

Enviro:Bit

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code editor. The sensors go hand-in-hand really well with the LED matrix on micro:bit, letting you graph sensors readings or have the LEDs react to sound, for example. Features Comes fully-assembled and ready to use BME280 temperature, pressure, and humidity sensor TCS3472 light and colour sensor MEMS microphone Compatible with micro:bit Microsoft MakeCode and MicroPython support No soldering required!

CHF 3,013.00*

Details

Grove Shield v2.0 for micro:bit

The Grove shield for microbit is a plug-and-play Grove extension board for micro:bit, the shield acts as a bridge between the micro:bit and the Grove system. The Grove system provides hundreds of different grove modules including sensor, actuator, communication, displays etc. that will broaden micro:bit’s scope in creating more projects easily and quickly. The board features 4 Grove connectors and also breaks out; GND, 3V, P0 ,P1 ,P2 ,P12 ,P13 from the micro:bit edge connector, pins 14 through 16 and IC2 also being available via the onboard Grove connectors. All of the non Grove connector breakouts can be connected to with either crocodile clips or 4mm banana plugs. The board also features a USB port for powering the micro:bit. This Grove shield is the same board that features in the Grove Inventors kit for micro:bit, which offers a great introduction to physical computing with the micro:bit. Features: A Grove systems compatible micro:bit interface board. It features 4 Grove style connectors. The board breaks out; GND, 3V, P0 ,P1 ,P2 ,P12 ,P13 from the micro:bit edge connector, pins 14 through 16 and IC2 also being available via the onboard Grove connectors. The non-Grove breakout points are compatible with crocodile clips and 4mm banana plugs. On-board USB port to power up your micro:bit.

CHF 12.90*

Details

Kitronik :VIEW text32 LCD Screen for the BBC micro bit

CHF 40.00*

Similar Items

Crocodile Leads (set of 10)

Content: 10 Paket(e) (CHF 50.90* / 1 Paket(e))

CHF 509.00*

Details

BBC micro:bit V2 - Kitronik Starter Kit

Unlock your potential and get creative with code, electronics, science, and engineeringwith the BBC micro:bit Starter Pack anything is possible! This micro:bit V2 starter kit contains everything you need to get going with micro:bit straight away. It consists of a BBC micro:bit V2, a 1M anti tangle USB Cable, a Battery Cage and 2 x AAA Batteries. The USB cable allows you to connect your micro:bit to a computer. The battery pack and batteries enable you to power your BBC micro:bit once you disconnect it from the USB. The starter pack is supplied in an organic bag that was designed for this purpose, features drawstrings, and can be used as permanent storage for the starter pack. It keeps your starter pack together and can be reused over and over again. The new micro:bit V2 is the latest revision of everyone’s favourite powerful palm-sized, and fully programmable computer. Conceived by the BBC to encourage children to get actively involved in writing software and building new things that will be controlled by it. V2 is the same size, shape, and it works in the same way as the original micro:bit. So, if you have used the original then this will be instantly familiar to you. Write your code using one of the easy to use editors provided on the micro:bit website, connect your BBC microbit to your computer via USB, press the download button in the editor, and then downloaded the file to the micro:bit. The BBC micro:bit is the spiritual successor of the BBC Micro of the 1980s, which itself introduced a generation of children to computing. The BBC micro:bit carries on this decades 30-year tradition and does it 18 times faster and it's also 70 times smaller than its predecessor. Features: The starter kit contains everything you need to get started with micro:bit. This starter kit is supplied in an organic re-usable bag. USB, Radio, serial, and Bluetooth Low energy connectivity. A Compass and Accelerometer. 2 x user-assignable buttons. A fully programmable 25 LED display. 25 pin notched edge connector. Onboard speaker. MEMs Microphone with LED indicator. Touch-sensitive logo. Light level sensing. Temperature sensing. Built-in sleep/off mode allowing the board to be powered-down with batteries connected. A discrete regulator that can supply up to 200mA of current to external accessories. Power status LED and USB data transfer LED. Code it with MakeCode; Blocks, Javascript, or Python. Contents: 1 x BBC micro:bit V2. 2 x AAA Batteries. 1 x Battery Cage. A 1M Anti Tangle USB Cable. An organic cotton storage bag.

CHF 36.85*

Details

PicoBoard

The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as 4 additional inputs that can sense electrical resistance via included cables. Designed for educators and beginners, the PicoBoard is a good way to get into the very basics of programming and reading sensors. A PicoBoard also comes with a USB cable and four sets of alligator clips that measure the electrical resistance in a circuit. You can use the alligator clips to build all kinds of custom sensors. For example, if you attach the clips to a pair of home-made bracelets, you can detect when your wrists touch.

CHF 57.14*

BBC micro:bit 10 Student Classroom Pack

BBC micro:bit Classroom Pack. The Classroom Pack consists of 10 x BBC micro:bits, 10 x 1M anti tangle USB Cables, 10 x Battery Cages and 20 x AAA Batteries. This buying option offers a better value way of obtaining multiple starter packs, making it an ideal choice for equipping your classroom. An individual starter pack contains everything you need to connect your BBC micro:bit to your computer and also enables you to power your BBC micro:bit once you disconnect it from the USB.Your BBC micro:bit will come in one of 4 colour schemes, unfortunately it is not possible to specify which colour you will receive. The BBC micro:bit is a powerful handheld, fully programmable, computer designed by the BBC and a number of partners to encourage children to get actively involved in writing software and building new things that will be controlled by it. Write your code using one of the easy to use editors provided on the BBC micro:bit website, connect your BBC micro:bit to your computer via USB press the compile button in the editor and then drop the downloaded file directly onto your BBC micro:bit. There is also an app for Android devices. Wirelessly connect and interact with the world around you. Use Bluetooth Low Energy to connect to mobile phones and tablets, take a selfie or drive the music in your playlists. The BBC micro:bit is the spiritual successor of the BBC Micro of the 1980s, which itself introduced a generation of children to computing. The BBC micro:bit carries on this 30 year tradition and does it 18 times faster and is 70 times smaller than its predecessor. Based around a 32 bit ARM Cortex-M0 processor, the BBC micro:bit also features on board accelerometer and compass sensors, Bluetooth Low Energy and USB connectivity, a display consisting of 25 LEDs, two programmable buttons and it can be powered by either USB or an external battery pack. The device inputs and outputs are through five ring connectors that are part of the 21-pin edge connector. Features: USB and Bluetooth Low energy connectivity. Compass and Accelerometer. 2 x user assignable buttons. A 25 LED display. 21 pin edge connector. Contents: 10 x BBC micro:bits. 10 x 1M Anti Tangle USB Cables. 10 x Battery Cage. 20 x AAA Batteries. Dimensions: PCB Length: 52mm. PCB Width: 42mm. PCB Height: 11.7mm. PCB Height: 11.7mm.

Content: 10 Paket(e) (CHF 28.60* / 1 Paket(e))

CHF 286.00*

Details

Kitronik ARCADE for MakeCode Arcade

The MakeCode Arcade editor has been designed to allow everyone, from beginners to experienced game enthusiasts, to create retro arcade games to run in the browser or on handheld consoles. It consists of drag-and-drop blocks that snap together to form programs. You can also write your code in Javascript and Python! The Kitronik ARCADE is a handheld gaming platform designed specifically for use with the MakeCode Arcade editor, either write your own games and run them on ARCADE or download existing games and enjoy a fully-featured handheld gaming experience.

CHF 41.55*

Makey Makey Classic

Makes STEM Education fun! Start out easy with a banana piano. First setup takes seconds. Then make game controllers, musical instruments, and inventions. Advance to female headers and multi-key remapping up to 18 keys. Ages 8 to infinity....

CHF 65.00*

Details