Micro:Bit V2 Nur Platinen

With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects. The board is small on footprint but big on features and connectivity. The Robotics Board features 2 Dual H Bridge Motor Driver ICs (capable of driving 2 standard motors or 1 stepper motor each) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from the BBC micro:bit using the I2C protocol via a 16 channel driver IC. Our custom MakeCode blocks make using I2C easy, even for novice users. The Link header breaks out all the usable pins from the BBC micro:bit, and is designed to allow 2.54mm pitch pin header to be easily soldered into place. The 17 available I/O pins allow other input devices, for example, sensors, or output devices, such as ZIP LEDs, to be added to the board. The I2C communication lines are also broken out (Pins 19 & 20), which means other I2C compatible devices can also be added to the board and controlled by the BBC micro:bit. Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board. There is also a green LED to indicate when the board is turned on. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit. This removes the need to power the BBC micro:bit separately. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered. To use the compact robotics board, the BBC micro:bit should be inserted firmly into the edge connector, with the LEDs and buttons visible from the front. Kitronik has produced a set of custom blocks for the MakeCode editor to simplify using the Compact Robotics Board for BBC micro:bit. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu and in the search bar type and enter Kitronik. Pick the Kitronik robotics Board from the list and the new blocks will be added to the menu in the editor. Features: A compact yet feature-packed board designed to sit at the heart of your robotics project. It can drive 4 motors (or 2 stepper motors) and 8 servos. The board also has 17 other I/O expansion points. The link header is designed to allow 2.54mm pitch pin header to be used. The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled. This board also features an on/off switch and power status LED. Power the board via either a terminal block or servo style connector. The 3V and GND pins are also broken out on the Link header, allowing external devices to be powered. Code with the Microsoft MakeCode editor with custom blocks by Kitronik or with Python. Contents: 1 x Compact Robotics Board for BBC micro:bit. Dimensions: Length: 68mm. Width: 46.5mm. Height: 10.6mm. PCB Thickness: 1.6mm

Bitte beachten Sie: BBC micro:bit ist NICHT enthalten. Das Kitronik Inventor's Kit für den BBC micro:bit ist der ideale Einstieg in die Programmierung und Hardware-Interaktion mit dem BBC micro:bit. Dieses Inventor's Kit enthält alles, was du für 10 Experimente brauchst, einschließlich der Verwendung von LEDs, Motoren, LDRs und Kondensatoren. Damit du sofort loslegen kannst, haben wir ein leicht verständliches Tutorial-Buch beigelegt, das dich durch alles führt, was du über die Programmierung des BBC micro:bit wissen musst. Sie brauchen keine Erfahrung mit dem Programmieren, da das Buch Sie bei jedem Schritt anleitet. Der BBC micro:bit verfügt über eine Reihe von Pins, die sich an der Unterseite der Platine befinden. Wenn Sie unser speziell entwickeltes Edge Connector Board in Verbindung mit dem Breadboard verwenden, können Sie diese Pins leicht nutzen, um zusätzliche Komponenten an den BBC micro:bit anzuschließen. Features: Führe 10 Experimente durch, die in der mitgelieferten Schritt-für-Schritt-Anleitung enthalten sind. Alle Teile sind enthalten, um die 10 Experimente durchzuführen (unten aufgelistet). Bricht 21 zugängliche Pins des BBC micro:bit mit Hilfe des Edge Connector Boards für den BBC micro:bit (im Lieferumfang enthalten) heraus. Kleines Prototypen-Breadboard für schnelles Prototyping enthalten     Inhalt: 1 x Montageplatte. 1 x Potentiometer - Vertikaler Typ (Fingerjustierung) 100K. 1 x Fingereinstellspindel. 2 x Kunststoff-Abstandhalter 10mm. 1 x Klebeband für Batteriepack. 1 x Kleines Prototypen-Brett. 1 x Klemmenanschluss. 4 x Druckschalter. 1 x Motor. 1 x Transistor. 2 x Rote 5mm LED. 2 x Orange 5mm LED. 2 x Gelbe 5 mm LED. 2 x Grüne 5 mm LED. 1 x RGB-LED, 5 mm. 1 x Lüfterflügel. 5 x 2.2KΩ Widerstand. 5 x 10KΩ-Widerstand. 5 x 47Ω Widerstand. 1 x Edge Connector Breakout Board für BBC micro:bit. 10 x Stecker auf Stecker Jumper Drähte. 10 x Überbrückungsdrähte von männlich zu weiblich. 1 x 470uF Elektrolytkondensator. 1 x Piezoelement-Summer. 4 x Pan Head M3 Maschinenschraube.  

This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the new micro:bit V2 and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer. The case is available in 4 different colour options. They are; Clear, Blue, Green, and Orange. The colours don't only look great, they can be used to differentiate between different people's cases. Handy! All of the cases are identical in all other regards. If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for BBC micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit. The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

This dandy little kit has a battery pack for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding adventures.The battery pack contains two AAA batteries and has a switch to turn the power on and off. It connects to your micro:bit with the attached JST adaptor.The micro-USB cable connects your micro:bit and your computer, and provides power and data (for coding) connections. Easy!Compatible with micro:bit v1 and v2.Please note: colour of micro-USB cable may vary!

The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics. More than just a programmable buggy, learning to use all of the included features will give the budding roboteer a solid grounding in robotics as a whole. Requires: 1 x micro:bit, 1 x USB Type-A to Micro-B USB Noodle Cable, 4 x AA batteries.

The expansion board comes with 6 fool-proof 3-Pin sockets, compatible with hundreds of DFRobot’s Boson and Gravity modularized electronic blocks, covering most popular digital and analog sensors and actuators, supporting sound, light and motion interaction. Moreover, the on-board 3.5MM headphone jack and volume knob supports direct connection of headphone. To ensure a steady current supply for these peripherals, the expansion board can be powered externally through the USB power port.  

micro:Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent. Optimized with better power management and larger capacity power supply, it can be perfectly compatible with HuskyLens AI Vision Sensor, which makes it an accessible AI robot teaching tool. In addition, micro:Maqueen Plus comes with a larger and more stable chassis, more built-in functions and more expansion ports, it is not only suitable for classroom teaching, but also can be suitable for after-school extended exercises and robot competitions. Note: micro:bit board und batterien nicht dabei. What’s new in Maqueen Plus V2? Two versions to choose from: 4 AA battery and 18650 battery New plastic box with a deeper base, enough room for the assembled car Frosted acrylic protective plate at the bottom, more durable and reliable The number of Line-tracking sensors has changed from 6 to 5, more convenient to program and optimize line-tracking codes Employs the motors whose parameters are the same as previous Maqueen, running steadily and smoothly Changes ultrasonic sensor to SR04, easier to install Add 4 RGB ambient lights at the base, RGB car lights have been changed to LEDs Delete the less usable magnetic encoder

This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit. Note, this item is a special order so lead times are a bit longer than usual. We include a 9V battery clip adapter with the CO2 sensor. (Battery not included).  

This micro:bit-based expansion board, specially designed for STEAM education, allows students to measure environmental conditions for scientific experiments by using rich on-board sensors that cover all basic aspects of nature and science in daily life, which helps them explore the related science knowledge and understand nature phenomenon. It aims to provide a platform for students to learn science theory with practices and bring science education closer to daily life!  Integrated sensors include UV sensor, temperature sensor, humidity sensor, air pressure sensor, sound sensor, light sensor, water temperature sensor, and a TDS (Total Dissolved Solids) water quality sensor, soil moisture sensor, TVOC, CO2 sensor, etc.   FEATURESV2.0 Update Comes with WiFi-IoT card, support IoT platforms such as IFTTT, ThingSpeak, EasyIoT Supports for the measurements of TVOC and CO2 MicroUSB power supply port, battery holder is welded on the PCB, more convenient for classroom teaching Onboard 4-way RGB lights 1-way motor driver More powerful chip and more IO ports Greatly optimized OLED display program, more convenient and flexible to use The color sensor is removed from the list Product Features Highly-Integrated (14 function modules): atmospheric pressure, temperature, humidity, harmful gases(TVOC), carbon dioxide, ultraviolet rays, light, sound, water quality, water temperature, soil humidity, buzzer, RGB light, OLED display, and motor driver. IoT Function: able to be accessible to famous IoT platforms such as IFTTT, ThingSpeak, and EasyIoT through the WIFI-IoT card. The interesting shape of the tree makes the classroom teaching more vivid and fun.

The Kitronik Smart Greenhouse Kit for the BBC micro:bit provides an exciting way to learn about the relationship between plants and their environment. The user will learn how to monitor environmental conditions and then how to build automated systems. The kit comprises a two-part plastic greenhouse, Kitronik environmental control board, water pump, Kitronik ZIP Stick, and Mini Prong soils moisture sensor. Also included are 5 crocodile clips, ZIP extension cable and a small screwdriver. Just add a micro:bit, seeds, and then some water and you will have everything you need! The kit also ships with detailed instructions that will get you up and cultivating in no time. Additionally, there are 7 online MakeCode tutorials. They cover everything from gathering sensor data and having the system automatically react to it, to visual user interfaces and more. At the heart of the micro:bit controlled Kitronik Smart Greenhouse Kit is the Kitronik environmental control board. This board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides the ability to control outputs for devices such as a water pump, fan, servo or heater pad.

The Smart City Kit has a well-selection of IoT:bit, DHT11 sensor, soil moisture sensor, water level sensor, sonar:bit, servos and etc., we could use it to build such themes as the smart parking lot, transportation network, and river level monitoring…, we can use it to learn more about the IoT and program, and more possibilities of the future city scenes are able to be constructed via it! We provide a very rich microbit projects. Kids can create their own microbit projects from our wiki. WHAT'S INCLUDED? 1 x IoT:bit Internet WIFI extension board for micro:bit 1 x LED-Green 1 x LED-Yellow 1 x LED-Red 1 x DHT11 sensor 1 x Sonar:bit 1 x Soil moisture sensor 1 x Water level sensor 1 x OLED screen 1 x EF92A 180° servo 1 x micro USB cable Jumper wires

Enter the world of robotics with our Simple Robotics kit and build your own easy build microbit-controlled robot. It has been designed, from the ground up, to be simple to build by even the youngest of fingers. From its one-piece cardboard chassis to its clip lead connections, everything goes together in a way that is as free from frustration as possible. Requires: 1x BBC micro:bit, 1x  Screwdriver, 1x Pair of Scissors.

HuskyLens ist ein einfach zu bedienender AI-Vision Kamera Sensor, der auf ein Eigenbau Roboter angebaut werden kann. Er kann lernen, Objekte, Gesichter, Linien, Farben und Tags durch einfaches Klicken zu erkennen. Die Einstellungen kannst du einfach über die Bedienknöpfe vornehmen. Über UART oder I2C-Port kann HuskyLens eine Verbindung mit deinem Arduino, Raspberry Pi, LattePanda oder BBC micro:bit herstellen. Mit dem HuskyLens kannst du sehr kreative Projekte durchführen, ohne mit komplexen Algorithmen spielen zu müssen. DFRobot hat sich beim HuskyLens zum Ziel gesetzt, der einfachste AI-Vision-Sensor zu entwickeln. Du kannst verschiedene Algorithmen über die Bedienknöpfe ändern. Du kannst dem AI-Sensor auch neue Objekte lernen, die er dann detektieren kann.  Info: HuskyLens ist neu auf dem Markt und es sind noch nicht viel Informationen und Programmierbeispiele vorhanden. Deshalb noch nicht für Anfänger geeignet.

The littleBits micro:bit Adapter connects micro:bit and littleBits enabling new learning experiences and creative inventions in a less-intimidating way. Enhance your learning with micro:bit by adding coding to your littleBits using platforms like the free Microsoft MakeCode or Python editor. It works by connecting the signals from the littleBits input and output bitsnaps to pins on the micro:bit edge connectors. No special coding libraries are needed. * micro:bit is required for use & sold separately