Bambu lab PLA Basic

Product information "Bambu lab PLA Basic "

RFID for intelligent printing

Experience the future of 3D printing with the Bambu Lab AMS (Automatic Material System). All important printing parameters are stored in a practical RFID chip. The 3D printer can read the print parameters independently. No more tedious settings - simply insert your filament and start the printing process. Enjoy convenient and time-saving operation without complicated manual settings.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	55 °C，8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 300 mm/s

Physical Properties
Density	1.24 g/cm³
Vicat Softening Temperature	57 °C
Heat Deflection Temperature	57 °C
Melting Temperature	160 °C
Melt Index	42.4 ± 3.5 g/10 min

Mechanical Properties
Tensile Strength	35 ± 4 MPa
Breaking Elongation Rate	12.2 ± 1.8 %
Bending Modulus	2750 ± 160 MPa
Bending Strength	76 ± 5 MPa
Impact Strength	26.6 ± 2.8 kJ/m²

Product features

- Easy to print and beginner-friendly
- Smooth surface
- Biodegradable
- Diameter: 1.75 mm +/- 0.03 mm

Reusable spool
Bambu Lab's filament system is focused on an environmentally friendly and reusable spool design, reducing plastic waste by at least 20%. Bambu Lab attaches great importance to sustainability and the packaging material has been carefully selected to minimize the use of non-recyclable materials.

Fach:	design

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Bambu Lab X1 Carbon 3D Printer

Product Features Multi Color & Multi Material Capability High quality printing with 7 μm Lidar Resolution Upgradeable and customizable flexibility High speed CoreXY with 20000 mm/s² Acceleration Dual Auto Bed Leveling What to Expect from the X1-Carbon 3D Printer 20 m/s² acceleration Micro lidar assisted bed leveling Active vibration compensation for better print quality Spaghetti failure detection and auto-pause Print resume after power outage Full advanced features of X1 3D printers

CHF 1,350.00*

Details

Liquid Glue for Build Plate

The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping. Features Excellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished. The Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up. Compared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface The ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues

CHF 28.05*

Bambu Activated Carbon Air Filter

Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points produce much fewer VOCs during printing. These VOCs are absorbed by our activated carbon air filter. Compatibility X1 Series Exclusive Instruction The X1-Carbon comes with a carbon filter which is used for filtering the air from the enclosure before it is expelled outside. Here's how you can replace it: 1. Remove the plastic cover 2. Gently pull on the carbon filter to remove it 3. Install the new carbon filter 4. Attach the plastic cover

CHF 9.95*

Details

Bambu Lab AMS - Automatic Material System

The Bambu Lab AMS is an intelligent system that communicates with the tool head to guarantee smooth feeding and automatic mid-print filament switching. Most failures with AMS are due to improper use. Here are some guidelines to reduce issues and have the best user experience. Color, the ultimate expression of emotions, is brought to you by Bambu Lab's Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials. Each AMS unit comes with 4 Reusable Spools (1 high temperature spool and 3 low temperature spools). Product Features Multi-Colors/materials Capability Keep Filament Dry Filament Runout & Winding Detection AMS Filament Backup In the Box 1x High Temperature Reusable Spool(made by PC/ ABS Alloy Material，no filament include) 3x Reusable Spool(made by ABS Material) 1x Filament Buffer 1x Bus Cable - 4pin 1x Bus Cable - 6pin 2x Spare Filament Cutter 3x M3*23 Screw 1x 550mm PTFE Tube 1x 370mm PTFE Tube 4x Internal Tube 1x PTFE Tube Connector 1x Instruction Manual 2x Desiccant（inside the AMS）

CHF 345.00*

Details

Bambu Glue Stick for Build Plate

A Bambu glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free. Compatibility X1 Series, P1P User Guide Apply evenly to the cleaned build plate before printing and cover all print areas. Please wash the plate after printing has been completed. Note WARNING! CHOKING HAZARD. Please keep small parts away from children under 3 years old and stored in a cool and dry place.

CHF 6.00*

Bambu Lab P1S 3D Printer

Product Features Works right out of the box, set up in 15 minutes Well-polished hardware and software Enclosed-body for high-temperature filament printing Up to 16-color printing with AMS Up to 20000 mm/s² acceleration, prints a benchy in 18min Build-in camera for remote monitoring and timelapse All-around performance right out of the boxIt just works right out of the box. You don't have to mess with it, just simply hit print, and the printer will handle all the calibrations (Auto-Bed Leveling, Vibration compensation) for you. Enjoy trouble-free printing every time with your P1S. Print fast with exceptional quality Cutting-edge control algorithm with the help of vibration compensation and pressure advance, bringing you lightning-fast print speed without compromising on quality.

CHF 1,120.00*

Similar Items

Bambu Lab PLA Metal

Bambu PLA Metal is a filament with a metallic textured surface designed to enhance the visual appeal of your 3D prints. Its design aims to mimic the texture of metal, although it does not contain any actual metallic fillers. With its advanced metallic surface, this filament gives your prints a professional and high-quality appearance and a touch of elegance without significantly affecting the overall printing performance of conventional PLA. RFID for intelligent printing All print parameters are embedded in RFID, which can be read via our AMS (Automatic Material System). Insert and print! No more tedious setting steps. Recommended print settingNozzle temperature 190 - 230°CHeating bed temperature 35 - 45°CPrint speed < 300 mm/sDrying settings 55°C, 8hStorage at < 20% RH Physical propertiesDensity 1.25 g/cm3Vicat softening temperature 62°CHeat deflection temperature 62°CMelting temperature 160°C Mechanical propertiesTensile strength 46 ‡ 2 MPaElongation at break 20.6 ‡1.4%Flexural modulus 2290 + 210 MPaFlexural strength 72 + 2 MPaImpact strength 58.9 ‡3.4 kJ/m2

From CHF 31.40*

Details

Bambu lab PLA Basic

RFID for intelligent printing Experience the future of 3D printing with the Bambu Lab AMS (Automatic Material System). All important printing parameters are stored in a practical RFID chip. The 3D printer can read the print parameters independently. No more tedious settings - simply insert your filament and start the printing process. Enjoy convenient and time-saving operation without complicated manual settings. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C，8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 300 mm/s Physical Properties Density 1.24 g/cm³ Vicat Softening Temperature 57 °C Heat Deflection Temperature 57 °C Melting Temperature 160 °C Melt Index 42.4 ± 3.5 g/10 min Mechanical Properties Tensile Strength 35 ± 4 MPa Breaking Elongation Rate 12.2 ± 1.8 % Bending Modulus 2750 ± 160 MPa Bending Strength 76 ± 5 MPa Impact Strength 26.6 ± 2.8 kJ/m² Product features - Easy to print and beginner-friendly- Smooth surface- Biodegradable- Diameter: 1.75 mm +/- 0.03 mm Reusable spoolBambu Lab's filament system is focused on an environmentally friendly and reusable spool design, reducing plastic waste by at least 20%. Bambu Lab attaches great importance to sustainability and the packaging material has been carefully selected to minimize the use of non-recyclable materials.

From CHF 26.90*

Details

Bambu Lab PLA Marble

Bambu PLA Marble Bambu PLA Marble imitiert das Erscheinungsbild von Naturstein. Dank anorganischen Partikeln in seiner Struktur bietet es eine lebendige, steinähnliche Textur, die an Marmor, Granit oder Ziegel erinnert. Ihre Drucken erhalten einen natürlichen Touch, das Ihren Projekten ein beeindruckendes Finish verleiht . RFID für intelligentes Drucken Alle Druckparameter sind in RFID eingebettet, die über unser AMS (Automatic Material System) ausgelesen werden können. Einlegen und drucken! Keine mühsamen Einstellungsschritte mehr. Empfohlene DruckeinstellungDüsentemperatur 190 - 230°CHeizbetttemperatur 35 - 45°CDruckgeschwindigkeit < 250 mm/sTrocknungseinstellungen 55°C. 8hLagerung bei < 20% RH Physikalische EigenschaftenDichte 1.22 g/cm3Vicat-Erweichungstemperatur 57°CWärmeformbeständigkeit 56°CSchmelztemperatur 156°CSchmelzindex 322 + 450/10min Mechanische EigenschaftenZugfestigkeit 42 + 3 MPaBruchdehnungsrate 6.7 ‡0.5%Biegemodul 2490 + 150 MPaBiegefestigkeit 85 + 5 MPaSchlagzähigkeit 240+25 kJ/m2

From CHF 31.40*

Details

Bambu Lab PLA Sparkle

Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest. However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle! RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended pressure settingNozzle temperature 190 - 230°CHeating bed temperature 35 - 45°CPrint speed < 250 mm/sDrying settings 55°C. 8hStorage at < 20% RH Physical propertiesDensity 1.26 g/cm3Vicat softening temperature 57°CHeat deflection temperature 55°CMelting temperature 156°CMelt flow index 34.2 ‡ 3.3 g/10min Mechanical propertiesTensile strength 33 + 3 MPaElongation at break 11.7 ‡0.7%Flexural modulus 2310 + 140 MPaFlexural strength 63 + 4 MPaImpact strength 66.5 ‡3.6 kJ/m2

From CHF 31.40*

Details

Bambu PLA Matte

Filament with Spool RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Recommended Printing SettingsDrying Settings (Blast Drying Oven) 55 °C，8 hPrinting and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)Nozzle Temperature 190 - 230 °CBed Temperature (with Glue) 35 - 45 °CPrinting Speed < 300 mm/s Physical Properties Density 1.31 g/cm³Vicat Softening Temperature 63 °CHeat Deflection Temperature 58 °CMelting Temperature 163 °CMelt Index 39.4 ± 3.2 g/10 min Mechanical Properties Tensile Strength 30 ± 5 MPaBreaking Elongation Rate 14.8 ± 4.2 %Bending Modulus 2360 ± 250 MPaBending Strength 53 ± 6 MPaImpact Strength 19.2 ± 3.7 kJ/m²

From CHF 29.10*

Details

Bambu PLA Matte

From CHF 26.90*

Details

Bambu Lab PLA Silk

Bambu PLA SilkBambu PLA Silk is characterised by a silky, extremely glossy surface that gives your prints a luxurious appearance. Compared to other filaments with a silk-like texture, Bambu PLA Silk has been hardened, resulting in increased break resistance during printing and making it particularly suitable for decorations, artistic projects and 3D character models. The gloss intensity of the model printed with Silk material can be controlled by adjusting the printing temperature and speed. For a glossier surface, higher printing temperatures and/or lower speeds are recommended. Recommended print settingNozzle temperature 210 - 240°CHeating bed temperature 35 - 45°CPrint speed < 250 mm/sDrying settings 55°C. 8hStorage at < 20% RH Physical propertiesDensity 1.32 g/cm3Vicat softening temperature 56°CHeat deflection temperature 53°CMelting temperature 152°CMelt flow index 20.5 ‡ 1.2 g/10min Mechanical propertiesTensile strength 35 + 3 MPaElongation at break 3.5 + 0.6%Flexural modulus 2220 + 90 MPaFlexural strength 77‡3 MPaImpact strength 24.5‡1.7 kJ/m2

From CHF 31.40*

Details