Bambu Lab X1 Carbon 3D Printer

6-pack Dessicant for AMS to keep filaments dry. Compatibility X1 and P1 Series User guide Please take 2 to 3 new desiccant packs, remove the plastic film from the desiccant, install it in the designated location for the AMS. Close the AMS cover to help keep your filament dry. Please ensure that the locking tabs on the AMS are closed to insulate the AMS from external air. How to check if the dessicant needs to be replaced When new, the desiccant will be a white powder. When the dessicant packs absorb moisture, they will gradually turn into a yellow paste. The desiccant needs to be changed when the entire pack is yellow because it loses the ability to keep the filament dry. We also recommend re-drying filament at that point.  

Bambu PLA SilkBambu PLA Silk is characterised by a silky, extremely glossy surface that gives your prints a luxurious appearance. Compared to other filaments with a silk-like texture, Bambu PLA Silk has been hardened, resulting in increased break resistance during printing and making it particularly suitable for decorations, artistic projects and 3D character models. The gloss intensity of the model printed with Silk material can be controlled by adjusting the printing temperature and speed. For a glossier surface, higher printing temperatures and/or lower speeds are recommended. Recommended print settingNozzle temperature                                                        210 - 240°CHeating bed temperature                                                35 - 45°CPrint speed                                                                      < 250 mm/sDrying settings                                                                55°C. 8hStorage at                                                                       < 20% RH Physical propertiesDensity                                                                            1.32 g/cm3Vicat softening temperature                                            56°CHeat deflection temperature                                            53°CMelting temperature                                                        152°CMelt flow index                                                                20.5 ‡ 1.2 g/10min Mechanical propertiesTensile strength                                                               35 + 3 MPaElongation at break                                                         3.5 + 0.6%Flexural modulus                                                            2220 + 90 MPaFlexural strength                                                             77‡3 MPaImpact strength                                                               24.5‡1.7 kJ/m2

Participants create superheroes to express their feelings and experiences. By using storytelling methods, maker technologies and creative writing they express complex emotions in the form of objects. For this, children employ technologies such as 3D printing, laser cutting, electronics and microcontrollers or even sewing. After the participants created their very own heroes, they face interesting and fun challenges and delve into deep ethical and moral questions in their adventures. Maker’s Red Box contains everything but a makerspace that a teacher and a group of 12 students need to start making. It consists of 16 two-hour long sessions that build on each other. Inside the Box Teacher’s Guide USB flash drive Lady Rainbow Lady Rainbow base villain villain base colour wheel discs, 6 colours charachter box side character box cover character box base question card box question cards minature charachter with wings female sample charachte three-headed dog sample charachter typoghraphy puzzle discs, 6 colours speech bubble story box inside (aluminium) glued, cabled, soldered, with switch story box locking unit, right side story box locking unit, left side story box layers, glued lesson plans in A4 envelope colour wheel characher box sides characher box base story box locking element, left side LED stripe,  5V aluminium foil tape, 50 mm x 10 m tumbler switch, 2-way USB connector, DIY story box sides foamed PVC, 10 × 8 x 130 mm strips foamed PVC, 10 × 8 x 230 mm strips tracing paper, 140 g, 300 × 400 mm two-core cable sketchbooks pens magnetic sheet, 300 × 400 mm cable lugs, uninsulated   For the workshops, you’ll also need: 4 3D printers 12 micro:bit microcontrollers 1 laser cutter 4 soldering stations 12 laptops

The Bambu Lab AMS is an intelligent system that communicates with the tool head to guarantee smooth feeding and automatic mid-print filament switching. Most failures with AMS are due to improper use. Here are some guidelines to reduce issues and have the best user experience. Color, the ultimate expression of emotions, is brought to you by Bambu Lab's Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials. Each AMS unit comes with 4 Reusable Spools (1 high temperature spool and 3 low temperature spools).     Product Features Multi-Colors/materials Capability Keep Filament Dry Filament Runout & Winding Detection AMS Filament Backup   In the Box 1x High Temperature Reusable Spool(made by PC/ ABS Alloy Material，no filament include) 3x Reusable Spool(made by ABS Material) 1x Filament Buffer 1x Bus Cable - 4pin 1x Bus Cable - 6pin 2x Spare Filament Cutter 3x M3*23 Screw 1x 550mm PTFE Tube 1x 370mm PTFE Tube 4x Internal Tube 1x PTFE Tube Connector 1x Instruction Manual 2x Desiccant（inside the AMS）

The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping. Features Excellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished. The Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up. Compared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface The ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues

Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points produce much fewer VOCs during printing. These VOCs are absorbed by our activated carbon air filter. Compatibility X1 Series Exclusive   Instruction The X1-Carbon comes with a carbon filter which is used for filtering the air from the enclosure before it is expelled outside. Here's how you can replace it: 1. Remove the plastic cover 2. Gently pull on the carbon filter to remove it 3. Install the new carbon filter 4. Attach the plastic cover  

Bambu PLA Marble Bambu PLA Marble imitiert das Erscheinungsbild von Naturstein. Dank anorganischen Partikeln in seiner Struktur bietet es eine lebendige, steinähnliche Textur, die an Marmor, Granit oder Ziegel erinnert. Ihre Drucken erhalten einen natürlichen Touch, das Ihren Projekten ein beeindruckendes Finish verleiht . RFID für intelligentes Drucken Alle Druckparameter sind in RFID eingebettet, die über unser AMS (Automatic Material System) ausgelesen werden können. Einlegen und drucken! Keine mühsamen Einstellungsschritte mehr. Empfohlene DruckeinstellungDüsentemperatur                                                              190 - 230°CHeizbetttemperatur                                                           35 - 45°CDruckgeschwindigkeit                                                       < 250 mm/sTrocknungseinstellungen                                                  55°C. 8hLagerung bei                                                                     < 20% RH Physikalische EigenschaftenDichte                                                                              1.22 g/cm3Vicat-Erweichungstemperatur                                          57°CWärmeformbeständigkeit                                                 56°CSchmelztemperatur                                                          156°CSchmelzindex                                                                   322 + 450/10min Mechanische EigenschaftenZugfestigkeit                                                                    42 + 3 MPaBruchdehnungsrate                                                          6.7 ‡0.5%Biegemodul                                                                       2490 + 150 MPaBiegefestigkeit                                                                  85 + 5 MPaSchlagzähigkeit                                                                240+25 kJ/m2

Kids are given an opportunity to imagine and design the city of the future they would like to live in. The city changes constantly as they get introduced to new technologies and learn to act as a team. The course introduces them to urban development concepts like governance and sustainability. They have to come up with solutions by creating a scaled down model with laser cutting, 3D printing and programmable microcontrollers. While building the city they are seeking answers for the challenges of the future they will soon experience. Maker’s Red Box contains everything but a makerspace that a teacher and a group of 12 students need to start making. It consists of 16 two-hour long sessions that build on each other. Included in the box: hexa box bottoms hexa box tops artificial turf rolls 300 × 400 mm pebble sheets 300 × 400 mm spreadable turf neopixel rings 5 mm photoresistors twin core wire warm white LED, clear clear filament piezo audio transducers (earthquake detector micro:bit connectors coloured paper heat-shrink tubing, size 3/1,5 For the Teachers: Teacher’s Guide USB flash drive composite drawings role-playing cards sample hexa box printed sample buildings lesson plans   For the workshops, you’ll also need: 4 3D printers 12 micro:bit microcontrollers 1 laser cutter 4 soldering stations 12 laptops  

A team of exceptional space engineers is formed to get to Mars and terraform the planet. The story evokes the inner explorer in children making every session just another adventure. Completing the mission is only possible if they create their own sustainable and efficient designs by employing their newly acquired tech skills. Maker’s Red Box contains everything but a makerspace that a teacher and a group of 12 students need to start making. It consists of 16 two-hour long sessions that build on each other. Inside the Box Teacher’s guide 1 USB flash drive 1 micro:bit motor control Kitronik 1 maps (board game map, story map, Mars map, large) 3 landing pad 1 4 x AA battery holder with switch and cover 1 geared robot/model motors, 3-6 V 2 battery holder fasteners 2 motor driver adapter 1 front bumper 1 rear bumper 1 wheels 2 rover motherboard 1 rover cover 1 table tennis ball socket 1 two-core cable 1,5 m silicone tube, size 2/6 0,5 m green LEDs, 5 mm 3 red LEDs, 5 mm 3 white LEDs, 5 mm 2 photoresistor, 5 mm, R = 8k-20k 1 M3 self-locking nuts 6 M3 threaded rod, 250 mm 1 M3 nuts 16 M3 × 40 cross-threaded bolts 6 M3 × 30 cross-threaded bolts 10 washers, 4 × 10 mm 22 geared robot/model motor, 3-6 V 1 metal film resistors, 100 Ω 2 test tube (15 × 100 mm) 1 landing pad pawn 1 astronaut pawn 1 dice, regular 1 dice, 10-sided 1 board game tokens 24 small cogwheels 2 large cogwheels 2 spacers, diameter 12 × 5 2 spacers, diameter 12 × 13 2 spacers, diameter 6 × 14 2 photometer 1 water tank, top 1 water tank, bottom 1 table tennis ball 1 2 × AA battery holder with cover, no switch 1 tumbler switch, 2-way 1 gate valve enclosure 1 dodecahedron, large dice 1 lesson plans in A4 envelope 16 two-core cable 12m silicone tube, size 2/6 3 m green LEDs, 5 mm 16 red LEDs, 5 mm 8 white LEDs, 5 mm 8 photoresistors, 5 mm, R = 8k-20k 8 M3 self-locking nuts 40 M3 threaded rods (250 mm) 8 M3 nuts 100 M3 × 40 cross-threaded bolts 40 M3 × 30 cross-threaded bolts 64 washers, 4 × 10 mm 264 4 x AA battery holders with switch and cover 6 geared robot/model motors, 3-6 V 18 metal film resistors, 100 Ω 8 test tubes (15 × 100 mm) 9 test tube rack 1 battery holder fasteners 12 motor driver adapters 6 front bumpers 6 rear bumpers 6 wheels 12 rover motherboards 6 rover covers 6 table tennis ball socket 6 small cogwheels 12 large cogwheels 12 spacers, diameter 12 × 5 12 spacers, diameter 12 × 13 12 spacers, diameter 6 × 14 12 table tennis balls 6 2 × AA battery holder, no switch 6 heat-shrink tubing, size 4/2 5 tumbler switch, 2-way 6 gate valve enclosure 6       For the workshops, you’ll also need: 4 3D printers 12 micro:bit microcontrollers 1 laser cutter 4 soldering stations 12 laptops

A Bambu glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free. Compatibility X1 Series, P1P   User Guide Apply evenly to the cleaned build plate before printing and cover all print areas. Please wash the plate after printing has been completed.   Note WARNING! CHOKING HAZARD. Please keep small parts away from children under 3 years old and stored in a cool and dry place.