3.6mm Ash Veneered Plywood, 600mm x 300mm sheet

This high quality A grade Ash Veneer Plywood Sheet (laserply) with a Chinese poplar underside and core is ideal for structural projects requiring a high-quality appearance and finish on the topside and panelling.

Knots or resin within the material can cause scorch marks when used on a laser cutter. These can usually be removed with fine grade wet and dry sandpaper.

Please note:

• As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm (see below - Tolerances and Caution).
• This product is most suitable for applications where a high quality outside surface is needed where visual aspects on the underside are not critical.

This is a 'Crown Cut' veneer with A grade topside quality.

A wood veneer is not like an artificial surface such as melamine or a laminate. It is cut from the log and therefore has it’s own unique grain, texture, and colour.

There are two different cuts that can be used in veneer production:

'Quarter Cut' are cut at 90 degrees, producing the effect of a straight grain.
'Crown Cut' are sliced through the log, producing 'Crowns'. This adds more character to the overall finish (as used in this product).
Features:

• High quality A grade Ash Veneer laser plywood sheet (laserply).
• Veneer thickness approximately 0.5mm.
• Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
• CC grade Chinese poplar underside and core.

Please Note:
Although this is A-grade Ash Veneer on the topside, the underside and core is CC grade Chinese poplar. We have used the product on our laser cutter successfully.

Contents:

• 1 x 3.6mm Ash Veneer Plywood (laserply), 600mm x 300mm Sheet.

Dimensions:

• Length: 600mm.
• Width: 300mm.
• Height: 3.6mm.
• Veneer thickness (approximately): 0.5mm.