LilyPad LED White (5pcs)

CHF 6.25*

Contenuto: 5 Paket(e) (CHF 1.25* / 1 Paket(e))

Prezzi incl. IVA più costi di spedizione

Non più disponibile. Per qualsiasi domanda, si prega di contattare la nostra hotline di assistenza in fondo a questa pagina.

Codice prodotto: SPRK-13902

Info sui prodotti "LilyPad LED White (5pcs)"

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

Bildungsstufe:	Scuola elementare, Scuola media, Scuole medie superiori e professionali
Fach:	e-Textiles, ed. manuale e tecnica

0 di 0 valutazioni

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.

Login

Il tuo indirizzo e-mail

La tua password

Visualizza le valutazioni solo nella lingua corrente.

Nessuna recensione trovata Condividi le tue opinioni con gli altri.

Accessory Items

Electro-Fashion conductive thread, 50 yards/ 45m

This is Kitronik's very own Electro-Fashion® branded Conductive Thread and we think it is among the best conductive thread available. It is perfect for hand sewing and can also be used on the bottom bobbin of a sewing machine (this will require the thread to be wound on to the smaller bottom bobbin first). Conductive thread can be used like conventional sewing yarn, however it electrically conducts allowing electronics to be integrated into textiles. This makes it ideal for use in a range of e-textile applications. The thread is nano plated with silver to make it conductive. The conductive thread has a generally low resistance but it does vary. We have measured between 40 and 160 ohms per meter, depending on the tension the thread is under. Once sewn the resistance is typically in the middle of this range. Over time the silver plating will degrade particularly if washed and we have measured in excess of 280 ohms on some of our older examples. Resistance does not vary significantly from one length of thread to the next, so you should be able to use this thread without concern for "dead" sections. The conductive thread has a breaking strain of around 9.3 pounds (4.2 kilos). It comprises roughly 96 individual filaments, each coated with a micron-thick layer of natural silver. This plating of the yarn is done in Europe to ensure as high a quality finish as possible. In construction, 16 of these filaments are wound together to form an initial twist; two of these twists are then twisted together, and finally three of these twists are combined to form the finished thread. The conductive thread is approximately 18 denier. It is heavier than a regular sewing thread, but not as heavy as an upholstery thread. It can be sewn on most domestic sewing machines using either a regular needle or the next size up. This thread does not fray. Features: No (or very low) fray. Conductivity = approximately 40Ω per metre (12.2Ω per foot). Count = 875 dTex. Strength 3000 cN. Elongation at break = 37%. Twist = 240Z-380S. Contents: 1 x Reel Electro-Fashion®, Conductive Thread, 50 yards / 45m.

CHF 13.50*

Dettagli

LilyPad Coin Cell Battery Holder - Switched - 20mm

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on. Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

CHF 4.25*

Dettagli

Conductive Thread - 60g (Stainless Steel)

This is about 330 meters of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large enough quantity to not be afraid of making a few mistakes. What sets this thread apart from the other conductive thread that we carry is the fact that it's actually spun from stainless steel fibers (as opposed to plated silver) and doesn't have a Nylon core. This means that while it may not be easy to solder to, because it's stainless, it also won't burn up when you touch it with a soldering iron. Also, it's somewhat 'hairy' and can be slightly more difficult to work with in close, fine conditions than the other thread. Our resident E-Textiles expert suggests waxing the thread for hand sewing, as this should take care of any 'hairy thread' issues. Since waxing is impractical in machine sewing applications, avoid sewing close connections by machine as the 'hairs' could potentially short across small distances.

Contenuto: 330 Laufende(r) Meter (CHF 0.25* / 1 Laufende(r) Meter)

CHF 81.03*

Lilypad Conductive Thread Bobbin

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

CHF 9.95*

Set di aghi

Questo set di aghi da cucito è un must per cucire il tuo prossimo progetto di e-textile. Ogni busta contiene tre aghi da 48 mm, 1,23 mm di spessore e due aghi più piccoli da 39 mm, 0,67 mm di spessore. La cruna di ciascun ago dispone di una misura che permette di infilare con facilità anche il filo conduttivo LilyPad.

CHF 322.00*

Similar Items

LilyPad LED Yellow (5pcs)

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.25*

LilyPad LED Green (5pcs)

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.75*

LilyPad LED Red (5pcs)

This is a simple pack of five Red LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.25*

Electroluminescent (EL) Wire

Il filo EL, noto anche come filo elettroluminescente, è un'anima di filo rigido rivestita di fosforo e poi ricoperta da un rivestimento protettivo in PVC. Quando viene applicato un segnale CA, si accende. Il cavo è disponibile in diversi colori. Sembra un po' un neon sottile. Molto pieghevole, mantiene la forma e si può avvolgere intorno al dito. È un modo semplice per aggiungere un po' di luce a un progetto, non è luminoso come i LED ma consuma molto meno! Abbiamo un filo EL di 2,6 mm di spessore con rivestimento verde chiaro, pretagliato e saldato a un filo EL a connessione rapida standard. Un tempo avevamo in magazzino i fili EL di Wanyu, ma purtroppo hanno chiuso i battenti e quindi non abbiamo più i fili EL ad alta luminosità. Detto questo, questo marchio sembra essere di buona qualità e vicino alla luminosità! Vengono utilizzati spesso per costumi, decorazioni, illuminazione d'accento, gilet di sicurezza, decorazioni per biciclette/motocicli/auto/barche/casa, insegne, ecc! Questo cavo non è stato progettato esplicitamente per l'uso all'aperto, quindi si scolorisce se esposto costantemente ai raggi UV. Per l'uso, il cavo deve essere collegato a un inverter che fornisca un'alimentazione CA di circa 100 V a 2000 Hz. L'inverter non è compreso nella fornitura! Questo cavo è lungo 250 cm, il massimo che può essere alimentato dal nostro pratico inverter tascabile portatile 2xAA. L'intera lunghezza assorbe 200mA dalle batterie 2xAA (quindi le batterie da 2000mAh durano ~10 ore in modalità "costante"). Abbiamo usato il filo di EL per realizzare la nostra fantastica borsa di TRON, quindi date un'occhiata per avere delle idee Si tratta di un pezzo di EL pretagliato, pre-saldato e lungo 250 cm. È possibile collegarlo direttamente a un inverter e farlo brillare in pochi secondi e, se si vuole fare qualcosa di più complesso, tagliare e risaldare man mano. Saldare il filo EL è un po' complicato, ma per fortuna abbiamo scritto istruzioni dettagliate passo dopo passo! Per tagliare e risaldare l'EL sono necessari spelafili, saldatore e stagno, nastro di rame e guaina termorestringente. Anche uno strumento di terza mano è molto utile. ⚠️Attenzione! I nastri EL, i fili EL e i pannelli EL sono prodotti con processi diversi: il colore e la luminosità non sono omogenei tra i vari tipi di prodotti EL. Il nastro EL non corrisponde esattamente al filo EL o al pannello EL, ma tutti hanno colori leggermente diversi.

Da CHF 14.50*

Dettagli

LilyPad LED Pink (5pcs)

This is a simple pack of five Pink LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.25*

LilyPad LED Blue (5pcs)

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

CHF 6.25*